Scully Grounding. Scully Grounding System.

 Grounding system

The Clamp and Cable Unit is designed to drain static charges built up on vehicles, railcars and other metal liquid tank containers. The clamp unit is designed to be connected, via two wires, to the Groundhog grounding verification system. When the clamp is attached to bare metal on the tank container, the system utilizes an intrinsically safe signal to verify that a proper static bond exists during liquid transfer operations. If the clamp is not properly attached to the tank vehicle, the system will not allow product to transfer. If at any time during the transfer process the clamp is disconnected, the system will send a signal to stop the product transfer. The clamp and cable unit is connected to a heavy duty, weatherproof junction box. The junction box acts as a housing to connect the cable wires and the controller wiring. In the event of a drive-away, the cable pulls out of the junction box. This maintains vapor tight safety and prevents damage at the control monitor. Other systems without a junction box disconnect and may allow nonintrinsically safe signals within the liquid transfer environment during a drive-away accident.

 We offer free advice on  jet fuel equipment and jet fuel quality control   to our account base.

30 yrs of experience
working for you !!!

 Join us now! Send us your "Bill to" and "Ship  
   to" addresses along with contact name, e-mail and phone number to have you in our system. Make it simple.
fuelequip@fuelequip.com

For orders e-mail us at:
sales@fuelequip.com

Don't let unsure earthing methods leave you guessing. Transport vehicles should be properly tied to earth before and during the loading operation. There should never be any doubt that the earthing systems at your terminals are performing their proper function. Many systems give you little assurance of their operation. The Groundhog� gives you complete assurance that a proper earth tie-in is present. The Groundhog� is a self-proving earthing system for maximum safety in loading operations. The system consists of a rack mounted control housing with two installation methods. It can operate in conjunction with your existing Overfill Prevention System or as an independent unit. The Groundhog� earthing system can be used for a wide variety of loading applications for use with tank trucks, rail cars, and aircraft refuelers.

Vehicle Grounding System provides self-proving capabilities for maximum safety through electronic protection. Only the Groundhog can offer you all these advantages for vehicle static grounding:  Prevents Loading until a proper static ground has been established. Automatically shuts off the loading operation if the ground is broken at any time during loading. The Ground Ball and Bolt can be installed easily in a few minutes.  Provides intelligent grounding verification with self-proving connections to the Ground Ball and Bolt. Self-proving feature provides visible proof that a proper vehicle static ground has been made and automatically permits loading.  Suitable for tank cleaning and other applications where verifiable grounding is needed.  Known for dependability, maximum safety and service common to all Systems.

We supply Static Grounding equipment to comply with the necesarry requirements in the industry. They include Static Grounding Reels, Plugs, Clamps, Cable as well as Ground Verification Equipment.

When it comes to peace of mind and more importantly, safety, you must be grounded. Believing that you have a ground while loading your transport at the terminal sometimes isnt enough new model 8030 Ground Verification Monitor visually confirms a ground connection between the transport and the loading terminal.

Safe-T-Ground provides continous monitoring of a trucks ground connection throughout loading operations. Static electricity is often brought in by tank trucks entering the loading area. The Safe-T-Ground instantly stops loading operations if a tank truck loses its ground.

We carry all types of durable reels (Aviation hose, Petroleum , Storage) and for all industries for customers throughout the world. Reel sizes vary from hand portable to over 12 feet in length. Quality: Our reels are simply the most durable and well-engineered in the industry. We invite anyone to compare our heavy-duty construction with the competition. Service: Our sales engineering staff goes to extra lengths to understand your application and help you select the best reel for the job. They all have significant experience out in the shop building reels. They are all ready and able to knowledgeably answer your questions.